This is a powerful transmitter so first of all I would like to tell you not to use this for illeagl things.You can transmitt signals from 2km.Use a matching antenna for this.
Note
# Dont give power without an antenna
# For L1 make 3 turns of 1mm enamelled copper wire on a 10mm diameter plastic former. On the same core make 2 turns of 1 mm enamelled copper wire close to L3 and that will be L2.
# by using R9 the gain can be controlled
# Inductor L3 can be a VK220J type RFC.
# This circuit operates with 9V to 18V ( Dont pass 24V)
